Serial number project unit parameters
1 structure form / translation
2 matching pump name model 
Flow m3/h 80-100
Lift m > 80
3 of the length of M is less than or equal to 216
The 4 machine flow into m3/h = 100
5 working pressure range MPa 0.2-0.35
The 6 tower number (span number) a = 3
7 ejector type, type / Nielsen D3000, A3000, S3000, R3000
Pressure MPa 0.1
Range M 7
A number of 20-72
M 1.2-3 adjustable from ground height
8 motor decelerator name model / standard speed motor
Rated power kW 1.5
Rated speed r/min 35
9 tower type / angle steel support
Walking speed m/min /
10 wheel form / rubber wheel
Tire model / 14.9X24
The outer diameter of the tire mm 1250
11 truss type / arch type
Length (span) m 54, 58, 60, 64
12 main pipe outer diameter mm 140
Wall thickness mm 3.25
13 tower car belt water quality Kg/ span 3300
14 terminal cantilever length m 12, 18, 24, 27
15 rolls of steering vehicle gyro degree 360
The diameter of 16 PE water pipe is mm Phi 90 and 110
The length of the 17 pipe is m 200-260
18 maximum climbing ability% 10

DPP/DYP electric rotary rotary sprinkler is an efficient new sprinkler. It is composed of reel guide vehicle, tower truck, spray truss, end cantilever and electrically controlled synchronization system. A few trusses with a sprinkler, supported on a number of tower trucks, are connected to each other with flexible rubber tubes to adapt to the sloping work. Each tower is equipped with a 1.5 kilowatt motor as a walking power, and a special electric control synchronous system is used to open and close the motor on the tower. When two adjacent towers form a situation that is not more than half a degree, the tower is followed by one.
It is a combination of the advantages of circular sprinkler and translational sprinkler. The translational machine with rotary function can be set to cover all kinds of farmland, and the length of the PE hose from 200 meters to 300 meters is used as the source of water supply. After the turning function is added, the cross body can revolve around 360 degrees. This function enables the coverage area of a translational machine to reach more than one time of the normal operation area, and the irrigated farmland with irregular shape can be maximally irrigated.
Because it can irrigate the slope less than 10% of the land, do not need to open the canal embankment, land leveling, only water, canals and lakes and other water sources. The machine is suitable for irrigation of grain, vegetables, sugar cane and other economic crops, can also spray fruit trees, nursery, and can also spray chemical fertilizers, pesticides and herbicides. It has the characteristics of uniform spraying, energy saving, high water saving and high automation, and high adaptability to crops and terrain and low total investment.
Compared with other irrigation methods, it has the following advantages: the irrigation area is large and the quality is good. It can irrigate land in a small amount of investment and short time. The control area is increased, and the investment cost of Mu is reduced. High mechanization and automation can make one person operate 2-5 units, improve labor efficiency, sprinkle water saving 30-50%, increase production value 20%-50%.
The series of electric translational sprinkler is developed by our company, which absorbs the advanced technology and recent research results of similar products at home and abroad. It is a new generation of sprinkler irrigation equipment which represents the advanced technology in China.